|
Work Head speeds r.p.m 3
steps(SGI 305/455600/800mm) |
90 to 350 |
|
Morse Taper center |
No. 3 |
|
Work Head Speeds r.p.m 4 steps(SGI
1000-1250/1500-2000-2500-3000 mm) |
35 to 350 |
|
Morse Taper Center (SGI 1000-1250mm) |
No. 4 |
|
Morse Taper Centre (SGI 1500-2000-2500-3000mm) |
No.5 |
|
Work Head Swivel |
90 degree |
|
TABLE |
|
Traverse speeds 4 steps (Mechanical) |
80 to 385 mm/min |
|
Traverse speeds 4 steps (Hydraulic) |
50 to 1000 mm/min |
|
WHEEL HEAD |
|
Rapid approach to all machines. |
50mm |
|
Wheel head with hand wheel (305/455/600/800) |
100mm |
|
Wheel head with hand wheel (1000/1250) |
100mm |
|
Wheel head with hand wheel (1500/2000) |
170mm |
|
Increment of feed dial |
0.005mm |
|
Swivel of wheel head |
45 + 45 degree |
|
Wheel Speeds (SGI 305/455/600/800mm) |
1800-2000 |
|
Standard size of wheel |
355x38x127 mm |
|
Wheel speeds (SGI 1000/1250mm) |
1500-1800 |
|
Standard size of wheel |
400x38x127 mm |
|
Wheel speeds (SGI 1500/2000/2500/3000mm) |
1200-1500 |
|
Standard size of wheel |
508x50.80x254 mm |
|
POWER |
|
Wheel Head (SGI 305/455/600/800/1000/1250mm) |
3 H.P |
|
Wheel Head (SGI 1500/2000-2500-3000mm) |
5 H.P |
|
Work Head (SGI 305/455/600/800mm) |
0.5 HP |
|
Work Head (SGI 1000/1250mm) |
1 HP |
|
Work Head (SGI 1500/2000-2500-3000mm) |
1.50 HP |
|
Hydraulic (SGI 305/455/600/800/1000/1250mm) |
1 HP |
|
Hydraulic (SGI 1500/2000mm) |
2 HP |
|
Hydraulic (SGI 2500/3000mm) |
3-5 HP |
|
Mechanical Table (SGI
305/455/600/800/1000/1250mm) |
0.5 HP |
|
Coolant Pump |
0.12 HP |
|
Internal Grinding Attachment |
1 HP |
