| Work Head speeds r.p.m 3
steps(SGI 305/455600/800mm) |
90 to 350 |
| Morse Taper center |
No. 3 |
| Work Head Speeds r.p.m 4 steps(SGI
1000-1250/1500-2000-2500-3000 mm) |
35 to 350 |
| Morse Taper Center (SGI 1000-1250mm) |
No. 4 |
| Morse Taper Centre (SGI 1500-2000-2500-3000mm) |
No.5 |
| Work Head Swivel |
90 degree |
| TABLE |
| Traverse speeds 4 steps (Mechanical) |
80 to 385 mm/min |
| Traverse speeds 4 steps (Hydraulic) |
50 to 1000 mm/min |
| WHEEL HEAD |
| Rapid approach to all machines. |
50mm |
| Wheel head with hand wheel (305/455/600/800) |
100mm |
| Wheel head with hand wheel (1000/1250) |
100mm |
| Wheel head with hand wheel (1500/2000) |
170mm |
| Increment of feed dial |
0.005mm |
| Swivel of wheel head |
45 + 45 degree |
| Wheel Speeds (SGI 305/455/600/800mm) |
1800-2000 |
| Standard size of wheel |
355x38x127 mm |
| Wheel speeds (SGI 1000/1250mm) |
1500-1800 |
| Standard size of wheel |
400x38x127 mm |
| Wheel speeds (SGI 1500/2000/2500/3000mm) |
1200-1500 |
| Standard size of wheel |
508x50.80x254 mm |
| POWER |
| Wheel Head (SGI 305/455/600/800/1000/1250mm) |
3 H.P |
| Wheel Head (SGI 1500/2000-2500-3000mm) |
5 H.P |
| Work Head (SGI 305/455/600/800mm) |
0.5 HP |
| Work Head (SGI 1000/1250mm) |
1 HP |
| Work Head (SGI 1500/2000-2500-3000mm) |
1.50 HP |
| Hydraulic (SGI 305/455/600/800/1000/1250mm) |
1 HP |
| Hydraulic (SGI 1500/2000mm) |
2 HP |
| Hydraulic (SGI 2500/3000mm) |
3-5 HP |
| Mechanical Table (SGI
305/455/600/800/1000/1250mm) |
0.5 HP |
| Coolant Pump |
0.12 HP |
| Internal Grinding Attachment |
1 HP |
