Smith Grinders India

Sizes (mm)

305-455-600-800-1000-1250-1500-2000-2500-3000 mm.

The universal Cylindrical Grinding Machine ideally suited to performing repetitive operations or small quanitity production with equal case.

Features :

Our exiting range of machines all models variable speed of work head and internal grinding spindles facilities are available if required on all models. We use anti-friction Turcite "B" slid-way material on the slides in all our models.
Hand operted lubrication pump for sufficient lubrication of slides.

Surface finish 2 micron (improved Ra values can be obtained by using selected grade of grinding wheel applicable to material to be ground.

DIMENSIONS	SGI 305 mm. 455 mm.	SGI 600 mm. 800 mm.	SGI 1000 mm.	SGI 1250 mm.	SGI 1500 mm. 2000 mm.
Tabel Swivel. Center Height.	9+3 130 mm	9+3 130 mm	6+3 150 mm	6+3 155 mm	6+3 220 mm
Work Head .
Work head speeds r.p.m. 3 steps (SGI 305/455/600/800 mm).					50 to 350
Morse Taper Center.					No.3
Work head speeds r.p.m 4 steps (SGI 1000-1250/1500-2000mm).					35 to 350
Morse Taper Center.					No. 4 to 5
Work Head Swivel.					90 degree.
. Table.
Traverse speeds 4 steps (Mechanical)					80 to 385 mm/min
Traverse speed step-less (Hydraulic)					50 to 10
Wheel Head.
Rapid approach to all machines.					50 mm
Wheel head with hand wheel (305/455/600/800).					80 mm
Wheel head with hand wheel (1000/1250).					100 mm
Wheel head with hand wheel (1500/2000).					170 mm
Increment of feed dial.					0.005 mm
Swivel of wheel head.					45+45 degree
Wheel speeds (SGI 305/455/600/800 mm).					1800-2000
Standard size of wheel.					305x25.4x127mm or 305x38x127 mm.
Wheel speeds (SGI 1000/1250 mm).					1500-1800.
Standard size of wheel.					400x38x127 mm.
Wheel speeds (SGI 1500/2000 mm).					1200-1500.
Standard size of wheel.					508x50.80x254 mm
. Power.
Wheel head (SGI 305/455/600/800/1000/1250 mm).					3 H.P/ 5 H.P
Wheel Head (SGI 1500/2000 mm).					5 H.P/ 7.5 H.P
Work Head (SGI 305/455/600/800 mm).					0.5.H.P
Work Head (SGI 1000/1250 mm).					1 H.P
Work Head (SGI 1500/2000 mm).					1.50 H.P
Hydraulic					1 to 2 H.P
Mechanical Table (SGI 305/455/600/800/1000/1250).					0.5 H.P
Mechanical Table (SGI 1500/2000).					1 H.P/2 H.P
Coolant Pump.					0.10 H.P
Internal Grinding Attachment					1 H.P
We reserve the right to change the design and specification of these grinding machines and their attachments.
Standard attachments: Coolant pump fitted on tank, Diamond Dresser 2 nos., Oil can, Dead Center 2 nos., Tool kit.
Additional attachment extra cost : Internal grinding attachment, Balancing stand, Balancing mandrel, Three point steady rest, Two point steady rest, Radius truing device , Spare wheel flange, Independent four jaws chuck, Magnetic cooland pump ,Grinding gauge.